Jacuzzi® Hot Tubs
2540-389 | Jacuzzi ProPolish Filter Bag
$28.14
Jacuzzi replacement filter bag, part #2540-389, for J-400 series hot tubs. This ProPolish filter bag works alongside your 2540-387J filter or your 2540-384 filter. It screens out twigs, grass, bugs, flower petals, and other large particles before they get to your filter cartridges. This bag is a durable part that you should rinse and clean for several seasons of use. With careful cleaning and care, this filter bag will last for up to two years.
As a factory-authorized Jacuzzi dealer, we offer a full manufacturer's warranty on all parts. However, filters, including this filtration bag, are designed to get dirty and (eventually) clogged during normal use. This normal wear and tear is not covered by any warranty.
An essential part of the filtration system for J-400 series Jacuzzi hot tubs. The Jacuzzi 2540-389 ProPolish filter bag catches larger particles such as bugs and seeds before they get to your filter cartridge. Most Jacuzzi J-400 hot tubs come with this filter bag as part of their initial set of filters. This Jacuzzi replacement filter bag can be rinsed, washed, and reused multiple times. Eventually, it may become so dirty or so frayed that replacing it becomes necessary.
This part should be hand-washed in dish soap and triple-rinsed before reuse. Do not use Cartridge Cleaner or Instant Cartridge Cleaner on this product.
Please note that this is NOT the debris attachment bag that goes inside the filter grille on many Jacuzzi models. This bag is much smaller and has a rigid plastic ring. The outer ring measures 6" in diameter. The inner diameter is 4 1/2" .
Jacuzzi® Hot Tubs
Frog @ease® 2-in-1 Water Care™ Floating System Cartridge Holder for Jacuzzi® Hot Tubs
$29.95
Compatible with the following cartridges:
FROG @ease 2-in-1 Water Care™ Floating System
FROG® @ease® System for Jacuzzi Hot Tubs
FROG® @ease® System for Sundance Spas
Jacuzzi® Hot Tubs
2472-135 | Jacuzzi J300™ Collection HYDROSOOTHE™ Pillow
$39.99
Genuine Jacuzzi brand part
Dark grey textured finish
Soft and luxurious
Restore your backyard oasis with these genuine Jacuzzi 2472-135 pillows. Pillows are one of the ways in which your spa can show its age. Replacing dingy, cracked, or waterlogged pillows can help your spa look new again! Jacuzzi Pillow 2472-135 features the modern hexagon texture and dark, charcoal-grey color of the current Jacuzzi lineup. Contains the complete one-piece pillow: No mounting hardware is included. Your J-300 series hot tub should have permanent mounting hardware that should last for years and years. The Jacuzzi 2472-135 pillow is for new (2020 and later) J-300 series spas. 2020 and 2021 J-300 hot tubs take two different pillows. Most seats use the "normal" pillows sold on this page. One seat, typically the lounge seat, uses the HydroSoothe massage pillow. That pillow has water spouting out the bottom. We do not offer that pillow for sale. Installing the massage pillow is a job for trained repair technicians. This pillow, Jacuzzi part # 2472-135, installs easily with sturdy thumbs and a bit of care.
Pillows are consumable units that should be replaced every two or three years. We recommend cleaning your Jacuzzi 2472-135 pillows with our Hot Tub Things Pillow & Cover Cleaner. Its special formulation removes grease and hair products from your pillows without causing foamy water.
Jacuzzi® Hot Tubs
2472-831 | Jacuzzi® J215/J225™ Pillow
$3,299.00
This pillow replaces old pillow part #6455-487
Easy to click into place and ready to use from the box. To check you have the correct pillow refer to the photo showing the connections on the reverse of the pillow.
Sundance® Spas
6600-551 | Sundance / Jacuzzi Long-Tip Temperature Sensor
$23.95
Sundance & Jacuzzi Temperature sensor
OEM part #6600-551
Long-tip water temperature sensor / 3-Pin Connector / 2-Wire
Does not include O-Ring part #6540-228
Jacuzzi® Hot Tubs
FROG® @ease® Cartridge Holder for Jacuzzi Hot Tubs
$29.95
It's finally here: Frog @ease for Jacuzzi Hot Tubs
Keep your Jacuzzi hot tub clean, sparkling, and safe by sanitizing your water with Spa Frog. Designed by Frog with the full cooperation of Jacuzzi, the @ease system fits your tub and fits your busy life. The @ease Cartridge Holder for Jacuzzi is your first step toward using @ease in a J-300, J-400, J-LX, or J-500 series hot tub.
The @ease Sanitizing System is a worry-free, manufacturer-approved method of keeping your water free of germs and algae. This cartridge holder adapts your older Jacuzzi hot tub to use the new Jacuzzi @ease System. This one-time purchase will enable you to enjoy low maintenance clean water just like newer tubs.
If your Jacuzzi hot tub was manufactured prior to 2010, you can probably still use the @ease System, but please contact us first to make sure.
Jacuzzi® Hot Tubs
6455-488 | J300 2014+ Pillow (Front Insert)
$27.51
The J300 Jacuzzi Pillow 6455-488 fits all 2002–2018 J-300 Collection models. However, the inset "scoop" curve of this pillow conforms to the designs of Jacuzzi J-300 series hot tubs made in 2014 and later. J-300 series hot tubs made before 2014 can use these pillows, but might prefer the older, convex pillows for a consistent look.
These pillows do not include the dark gray outside pillows, sometimes referred to as pillow mounts, which is part# 2455-105 and are sold separately.
Jacuzzi Pillows add a new degree of comfort to a spas relaxing atmosphere. After setting up your hot tub, just lean back onto the concave headrest to take in the rejuvenating experience.
Jacuzzi® Hot Tubs
2000-498 | Jacuzzi ProClear II Filter Cartridge
$39.95
45 square feet of pleated filtration media
Lasts up to 18 months with regular cleanings
Genuine Jacuzzi part # 2000-498
The Jacuzzi ProClear II Filter Cartridge, model 2000-498, is a rare filter. It fits only J-460 and J-465 spas built during a short span of the late 2000s. We have a small supply of these filters in our warehouse. The last tubs that used this filter were phased out in 2011. As a result, few dealers still sell it.
If you have any doubts about compatibility with your hot tub, please contact us before ordering.
Jacuzzi® Hot Tubs
2540-380 | 25 Sq. Ft. Filter Cartridge
$22.15
$59.50
Genuine Jacuzzi Part, guaranteed quality and compatibility
25 square feet of filtration material for clean, clear water
Replaces the following parts numbers:
FC-1330
PLE-051-9167
PLE-051-9478
PLE-051-9479
C-5601
6199000
43295401R
46128
4900-62
PJW23
Jacuzzi® Hot Tubs
6455-485 | Jacuzzi J-LX®/J-LXL® Pillow (2011+) (2472-006)
$34.99
Pillow Replacement
Snap-in
Jacuzzi® Hot Tubs
2455-104 | Jacuzzi J-300 Pillow (insert only)
$30.99
Official Replacement Jacuzzi Pillow, part # 2455-104
Does not include back mount pillow (2455-105)
Replaces Part #6455‑007 used 2002-2006, which did not have the Jacuzzi logo that allows for the new LED lighting system
Pillow insert for LED mood lighting systems. Displays clear Jacuzzi® logo.
Sundance® Spas
6570-392 | Jacuzzi® Mesh Skimmer Debris Bag ProClarity w/7 Clip Holes
$9.99
Trap: Debris attachment (mesh skimmer bag)
Used on J-300 series
Not compatible with J-200 series
OEM Jacuzzi part #6570-392
6 holes on the top | 1 hole on the bottom
Compatibility
J-300 Series | 2002-2013
If your debri bag is still new, why buy a new one when you can clean it and make it new once more! Watch the video below to see how.
Why not give your filter cartridges a good clean with our top-selling Hot Tub Things Cartridge Cleaner?
Sundance® Spas
6570-395 | Screw: 8X1-5/8 PHD S/S (Teak)
$1.17
Over time, it's completely normal to replace your Sundance & Jacuzzi Cabinetry Screws. Why request a technician when you can easily remove the screw yourself and replace it within minutes.
Note: Jacuzzi has begun switching over part numbers to Sundance Spas part numbers.
Jacuzzi #6570-302 can be replaced by Sundance #6570-393 | Grey
Jacuzzi #6570-303 can be replaced by Sundance #6570-394 | Mahogany
Jacuzzi #6570-309 can be replaced by Sundance #6570-395 | Teak
Sundance® Spas
6560-860 | Sundance® Spa Jacuzzi® w/ Transparent Tee Fitting
$39.95
Compatibility
2005-2015 850/880 Series
2008+ 680 Burlington Equipped with circulation pump
2007+ 680 Hartford and Hawthorne Equipped with circulation pump
All 2001-2015 1-Pump Capri Models
All 06/1999-2004 2 or 3 Pump Sundance Models
2002-2003 J-350, J-360, J-370, and J-380 Models
2004-2006 J-355, J-365, J-375, and J-385 Models
Sundance® Spas
6600-751 | Sundance / Jacuzzi Temperature Sensor w/ 3 Pin Connector
$23.95
Sundance & Jacuzzi Temperature sensor
OEM part #6600-751
This has a 3-pin connector
Does not include O-Ring part #6540-228
Sundance Compatibility
A. 03/2018+ 880 Cambria
B. 2018+ 680 Series
C. 04/2017+ 780 System
D. 10/2016+ 980 System
E. 2016+ 880 System
Jacuzzi Compatibility
A. 2015+ J-500 Series
B. 09/2015+ J-400 Series
C. 2016+ J-300 Series
D. 2018+ J-200 Series
E. 2018+ J-100 Series
Jacuzzi® Hot Tubs
2455-105 | Jacuzzi J-300 Pillow (back mount)
$27.99
2455-105 Jacuzzi Pillow Base Back Mount.
NOTE: This is the mount only.
Does not include pillow insert part #2455-104 (pillow insert with LED logo)
Does not include pillow insert part #2455-007 (pillow insert with LED logo)
Jacuzzi® Hot Tubs
6540-164J | Jacuzzi® PROCLEAR® 75 Sq Ft Filter
$59.99
Jacuzzi filter with removeable cap (6541-384) that you can use with the 2890-185 Mineral Purifier.
6540-164 J-LX®/J-LXL® Series Filter Cartridge with Cap - 75 sq. ft.
Replaces filter part #2000-286
Jacuzzi® Hot Tubs
2472-005 | Jacuzzi J-500 Pillow
$45.99
Replaces old part #2455-266
4 Total pillows on spa
Measures 11-1/2″ x 5″
Backside has 2 Pegs 5-3/8″ apart
Jacuzzi 2455-266 Replacement Pillow
Sundance® Spas
6600-166 | Short Tip Temperature Sensor with Curled Finger Connector
$21.95
Compatibility
2006+ 780/680 Series
2005 780/850E Systems, Portofino, and Sweetwater
2003-2005 Del Sol Systems
1998+ Solo, 701 and 724 Systems
2002-2003 J-310, J-320, J-330, J-340
2004+ J-315, J-325, J-335, J-345
2007+ J-365, J-375, J-355, J-385
2005+ J-210, J-220, J-230
2007+ J-270, J-280
2012+ J-280, J-275, J-245, J-235
2011+ J-LX & J-LXL
Sundance® Spas
6570-302 | Screw: 8X1-5/8 PHD 305 S/S (Gray)
$0.95
6570-302 | Screw: 8X1-5/8 PHD 305 S/S (Gray)
Sundance® Spas
6540-228 | Sundance® & Jacuzzi® Temp Sensor O-Ring
$1.95
OEM part #6540-228
0.662" ID x 0.210" Ø
Interchangeable part for both Sundance & Jacuzzi
Use in conjunction with temp sensor part #6600-167, 6600-166, or 6600-070
Compatibility
Jacuzzi (All years & Models) only in conjunction with temperature sensor part #6600-070
Sundance (All years & Models) only in conjunction with temperature sensor part #6600-167 or #6600-166